Pontiac 2005 Grand Am User Manual Page 238

  • Download
  • Add to my manuals
  • Print
  • Page
    / 334
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 237
3. Fill the coolant surge tank with the proper mixture, to
the hash mark on the label. Wait about five minutes,
then check to see if the level is below the hash mark.
If the level is below the hash mark, add additional
coolant to bring the level up to the hash mark.
Repeat this procedure until the level remains
constant at the hash mark for at least five minutes.
4. With the coolant surge tank pressure cap off, start
the engine and let it run until you can feel the upper
radiator hose getting hot. Watch out for the
engine cooling fans.
By this time, the coolant level inside the coolant
surge tank may be lower. If the level is lower than
the hash mark, add more of the proper mixture
to the coolant surge tank until the level reaches the
hash mark.
5. Replace the pressure cap. Be sure the pressure
cap is hand-tight and fully seated.
See your dealer, if necessary.
5-30
Page view 237
1 2 ... 233 234 235 236 237 238 239 240 241 242 243 ... 333 334

Comments to this Manuals

No comments