Pontiac 2004 GTO User Manual download pdf (Page 137)

Altering Overspeed Presets

The default overspeed settings can be changed for your

individual preference.

The car must be standing still when changing a preset.

Ensure the preset you wish to change is showing.

Then brieﬂy press the SET button. The display starts to

ﬂash. Use the up or down arrows to adjust the setting.

When correct, brieﬂy press the SET button. Each

PRESET can be changed in this way.

The presets are automatically arranged in

ascending order.

One or more presets can be assigned to OFF, by

reducing the preset down to 0 (OFF). When driving you

then only have three or less presets to choose from.

To turn back on, select the OFF preset (when the

vehicle is standing still) and use the up arrow to increase

the number.

If the up or down arrows are brieﬂy pressed while

driving, the overspeed setting is changed to the speed

at which you are travelling.

If the SET button is pressed for two seconds, either

while driving or standing still, overspeed is turned

completely off or on.

Stop Watch

The stop watch function, when enabled, records

elapsed time. It can be used, for example, to measure

the time taken to travel between two points on a trip.

To start/stop the stop watch, press SET to reset it, then

press and hold MODE for more than three seconds.

The trip computer must be on Trip Time for this function

to work.

DIGITAL SPEEDO

If digital speedo mode is activated, the mph (km/h) are

shown in a large digital mode.

Rest Reminder

This feature alerts you when you may have been

travelling for too long without a break. After the ignition

is turned on, a timer will start, and after two hours of

continuous driving, the trip computer automatically

shows the rest reminder display. The default on this

feature is off.

3-39

1 2 ... 132 133 134 135 136 137 138 139 140 141 142 ... 325 326

No comments

Pontiac 2004 GTO User Manual Page 137